typical performance a-size flatpack outline general notes: 1. the AEF-35A-500 is a constant impedance, voltage controlled, pin diode , p network variable attenuator covering 10 to 1,000 mhz. 2. careful design of thick film resistive pads and detailed selection of suitable pin diodes provide a wide operating bandwidth and attenuation range. units with closely controlled phase shift are available as aff-20a series. 3. screened versions with extended reliability components are available on request for hi-reliability and similar applications. general specifications impedance: 50 w nom. vswr: 1.5:1 typ., 2.5:1 max. bias: +15 vdc @ 1 ma nom. control voltage: 0 to +15 vdc control current: 0 to 10 ma control bandwidth : dc to 100 khz input intercept point : +21 db nom. (2 tone, 3rd order, @ input o f --- - 10 dbm) switching time : 20 m s typ. (step input, 5 0 w source impedance) weight, nominal: 0.1 oz (2.8 grams) operating temp: -- 20 to +85c AEF-35A-500 pin diode attenuator 10 to 1000 mhz / 0 to 30 db attenuation range / voltage controlled / multi-octave / hi-rel fl a t - pack principal specifications operating attenuation insertion frequency range , loss, max., range, mhz db, min. @ v c =15v 10 - 100 0 - 50 3.0 db 100 - 500 0 - 35 3.0 db 500 -1000 0 - 30 3.0 db for further information contac t merrimac / 41 fairfield pl., west caldwell, nj, 07006 / 97 3 -575-1300 / fax 973-575-0531 23feb96 notes: 1. tolerance on 3 place decimal s .010(.25) except as noted. 2. dimensions in inches over millimeters. 3. dimensions marked with * apply only at body. 4. all unmarked terminals are ground.
|